. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). Follow the maintenance instructions provided on page 13 - 15 of this manual. To register your warranty online, visit us at • Usando uma chave de. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. Pulling on the. ▷ Support panels or any oversized workpiece to minimize the risk. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. Do not use the power socket on the wet vacuum extractor. Raise the scrub head to the transport position by stepping on. - Do not allow children to play on or around machine. Remove power cord plug from battery pack. máquina e anulará as proteções incluídas. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. - Keep power cord away from heated surfaces. Keep all fasteners tight and be sure the power blower is in safe working condition. Power Up the Machine. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. ▷ Remove any adjusting key or wrench before turning the power tool on. - Report machine damage or faulty operation immediately. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. local Hilti Store or online at: www. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. 1.